Fastenings for ventilated facades - Series MB

Anchorage systems for ventilated facades

This anchoring system is totally made of steel: galvanized or stainless. This anchoring system is the best solution for ventilated facades with aligned vertical joint.


The load bearing brackets type OMEGA are available in different dimensions according to the insulation thickness and the air gap between cladding and wall.

The vertical mullions are available in three different type and dimensions according to the project and the static calculation.

The cladding bracket type MB are produced in stainless steel AISI 304, AISI 316, AISI 430. They are also available in four different dimensions: 50 mm, 65 mm, 100 mm, 140 mm and in two different thickness 2 mm and 3 mm.

fastenings for ventilated facades Anchoring system Series MB

The anchoring system is composed of vertical C shape profile type K2 (X) in steel (Y) cold formed and with slot on the backside, distance 50 mm from slot to slot, cut in bar of exact length according to the project requirementst. The vertical groove along the vertical profile allows, with the use of special nut, the front connection of the cladding tile and the fast correction of the level and alignment.

The vertical profiles are fixed to the wall at a specific distance each other (normally in the middle of the vertical joint of the cladding) by means of a steel special bracket (Y), i.e. plate OMEGA shape. The bracket dimension is calculated according to the load and the shape is studied to reduce the thermal bridge. he load brackets are fixed to the structure in concrete by means of anchors (mechanical or chemical) and allows an adjustment of ±20 mm of the vertical alignment. The vertical profile is also fixed along the wall by means of threated bar and anchors according to the wall material.

The cladding plate type M or B in stainless steel are designed to support and hold the marble in a cut, the so called “kerf”, made in the thickness of the stone, on the top and on the base of each cladding panel.

Series MB – Fastenings for ventilated facades benefits

All the elements are produced in the exact length according to the project, with hole and slot: to reduce at minimum the use of electric equipment on site, to speedy up the installation on site, to allow easy levels regulation and alignment, to allow thermal expansion.

Series MB – Fastenings for ventilated facades certifications

All the anchoring system elements are produced following high standard of quality according to ISO 9001 and are also CE certified according to the UNI EN 1090.

Series MB – Fastenings for ventilated facades materials

  • Vertical profiles type (X): K1, K2, GL32.

  • Vertical profile and load bearing plate material (Y): carbon steel sendzimir galvanized Z275, carbon steel electrolytic galvanized, carbon steel hot dip galvanized, stainless steel AISI 304 (A2) , stainless steel AISI 316 (A4) , stainless steel AISI 430.

  • Cladding plate material (Z): stainless steel AISI 304 (A2), stainless steel 316 (A4), stainless steel 430

OUR references

The product Fastenings for ventilated facade – Series MB has been used for the realization of several projects.
Find out more!

Need more information?
Contact us by email at or complete our online contact form if you need more information about the product or for general enquiries.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.